Anvil

Carpet tile collection

Anvil

Crafted for toughness.

Hard-wearing carpet tiles in solution-dyed polypropylene. A multi-level loop draws tonal blocks of fine ribbed lines across the floor, giving it the solid, structured look of forged metal and stacked timber.

Made in UAE · Supplied from Dubai · Class 31–32

Request free samples Get a quote

6

Colourways

50 × 50 cm

20 tiles / 5 m² per box

550 g/m²

Tufted weight

Class 31–32

Commercial use

1/12

Gauge · 45 stitches per inch

5–7 mm

Multi-level loop pile

100% PP

Solution-dyed polypropylene

PVC + glass

Fibreglass-reinforced backing

Strength you can see

Anvil is built for floors that work hard, with a texture that shows it.

Each tile is tufted as a multi-level loop at 1/12 gauge. Higher and lower ribs form tonal blocks of fine parallel lines that change direction from block to block, so the floor reads as solid and structured rather than flat.

Because the blocks are irregular, seams disappear, traffic lanes are masked, and a single damaged tile can be replaced without leaving a visible patch.

From the light 002 Steel to the deep 004 Black and the colour of 006 Blue, the six colourways cover corporate, hospitality and education projects with one consistent construction.

Choose your colourway

Six tones, made in Dubai and supplied locally across the UAE and GCC. Tap a colour for its full product page.

001 Slate

Soft green-grey with tonal ribbed blocks

Best for: Open-plan offices, studios, workspaces

View 001 Slate →

002 Steel

Cool light grey with fine ribbed texture

Best for: Receptions, lounges, bright offices

View 002 Steel →

003 Charcoal

Mid charcoal with layered ribbed blocks

Best for: Corridors, cafés, circulation

View 003 Charcoal →

004 Black

Deep graphite with tonal ribbed blocks

Best for: Boardrooms, executive suites, high-traffic zones

View 004 Black →

006 Blue

Deep cobalt blue with tonal ribbed blocks

Best for: Breakout areas, branded spaces, borders and zoning

View 006 Blue →

007 Brown

Warm sand taupe with tonal ribbed blocks

Best for: Lounges, meeting rooms, hospitality

View 007 Brown →

Why Anvil

Crafted for toughness

Tufted 1/12 gauge multi-level loop with 45 stitches per inch at 550 g/m², rated Class 31–32 for commercial use.

Colour that lasts

Solution-dyed polypropylene: the colour runs through the fibre, so it resists fading from sunlight and bleaching from cleaning.

Stays flat

PVC backing reinforced with fibreglass keeps every tile dimensionally stable and easy to lift and relay.

Tested for safety

Passes flammability (CPSC FF 1-70) and radiant panel (ASTM E648) tests. Anti-static and traffic-resilient, with added sound and heat insulation.

Design freedom

Install monolithic, quarter turn, brick ashlar or vertical ashlar, or combine two colourways to zone a room.

Made in the UAE

Produced in Dubai Industrial City and supplied locally, so projects avoid import lead times and shipping delays.

Features: Sound insulation · Heat insulation · Anti-static · Colourfast · Traffic-resilient · Flame-tested

Zone a room with two colours

All six Anvil colourways share one construction and thickness, so they lay together without transitions.

In this meeting room, 006 Blue runs as a border and 007 Brown sits under the table. The change of colour marks the meeting area without walls or trims, and either zone can be extended or reworked later one tile at a time.

Request free samples Get a quote

Installation methods

Monolithic: all tiles face one way, so the ribs run in one direction like a continuous field.
Quarter turn: each tile turned 90°; the ribbed blocks alternate into a parquet-like weave.
Brick ashlar: rows offset by half a tile; softens seams in long rooms.
Vertical ashlar: columns offset by half a tile; emphasises length in corridors.

Carpet tiles go down without seaming or stretching, lift for access to raised floors, and can be replaced one at a time.

Where Anvil works best

Space	Best colourways	Why
Open-plan offices	001 Slate, 002 Steel	Calm, light texture across large floor plates
Corridors, cafés and circulation	003 Charcoal, 004 Black	Dark ribbed texture masks traffic lanes and soiling
Boardrooms and executive offices	004 Black, 006 Blue	Deep, confident tones
Meeting rooms with zoning	006 Blue border with 007 Brown centre	Marks the table area without walls
Receptions, lounges and hospitality	002 Steel, 007 Brown	Bright or warm and welcoming
Education, co-working, retail	Any	Class 31–32 commercial rating, single-tile replacement

Technical specification

Product details

Product type	Carpet tile
Collection	Anvil
Construction	Tufted 1/12 multi-level loop
Yarn	Polypropylene (PP)
Dye method	Solution dyed
Backing	PVC reinforced with fibreglass
Tile size	50 × 50 cm · 25 × 100 cm plank on request
Gauge	1/12
Stitches	45 per inch
Pile thickness	5–7 mm (multi-level)
Tufted weight	550 g/m²
Packing	20 tiles / 5 m² per box
Colourways	6 (001–004, 006, 007)
Origin	Made in UAE

Performance (all pass)

Tuft bind strength	ASTM D1335
Delamination strength	ASTM D3936
Flammability	CPSC FF 1-70 / ASTM D2859
Radiant panel	ASTM E648 / NFPA 253
Usage classification	Class 31–32 commercial